996 Carrera Group 7 Body Equipment, Interior / PAGE 17
[IJ Note! · .The following componentsmust be removed before disassemblingthe dashboard.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Linings, insulation
[IJ Note!
.The following componentsmust be removed before disassemblingthe dashboard.
.=> Rep.Gr. 705719; Removingand installingA-pillartrim.
.=> Rep.Gr. 695819; Removingand installing the driver's airbag
.=> Rep.Gr. 695919; Removingand installingthe passenger's airbag
No. Procedure Instructions
Removingthe alarm readinesscover and Lift the alarm readinesscover -3- and unclip it upwards
the defroster cover out of the clip -4-. The lens cover -2- can be unclippedfor
replacementpurposes.
Lift the defroster covers left and right -5, 6- with a plastic
spatula and unclip out of the clips -4-.
2 Removingthe alarm readiness unit Undothe fastening screws -7-, lift the alarm readinessunit
-8- and disconnectthe electrical connection.
3 Removingthe loudspeaker Undothe fastening screws -9-, raise the outside of the
loudspeaker-10- and guide it out. At the plug connection,
-II-press the locking tab -arrow- and disconnect.
4 Removingthe instrument mount To remove the hazardwarning light switch: switch on the
switch -12- (button comes out). There are small openings
on the sides which now project over the instrumentcowl.
Insert two narrow screwdriversinto the openings -arrow
A- and pull off the button towards the front. The hazard
warning light switch -13- is held in the instrumentbridge
-17- by two locking hooks -arrow B-. Press the right lock-
ing hook toward the switch, grip the button holder with a
pair of pliers and pull out the switch toward the front. Press
the collar -14- out from the rear. Pull off the cover -15- on
the left side and undo the fastening screws -16-. Lift the
instrumentmount-17- on the left and right and unclip from
the clips -4-.
5 Disconnectingthe electrical plug connection Disconnectthe electrical connection-18- on the rear side
of the instrumentmount. To do so, press the locking tab of
the plug connection and unlock the locking lever in the
-direction of the arrow-.
701837 Disassembling and assembling the dashboard 70-1 page 3
Printed in Germany -44, 2001 c7018371
This is a source reference. Confirm exact model applicability in the original material.
