No. Procedure Instructions · Removingthe side vents and the tempera- Pull off the covering c

911 Carrera (996) Linings,insulation No. Procedure Instructions Removingthe side vents and the tempera- Pull off the covering caps -20, 20A-. Undo the fastening ture sensor screws -21- at the side, remove the side vent -22- towardsthe front. Unclipthe temperature sensor -24- out of the dashboard towards the rear. Disconnectthe electrical plug connection-23-. 7 Removingleft side vents and main light Pullforward the control button -25- of the light switch -31- switch as far as it will go -in the direction of the arrow- towards the front. Press in the locking device at the lower side using a small screwdriver and remove the control but- ton towardsthe front. Undothe fastening screws -21- at the side, remove the side vent towardsthe front. Disconnectthe plug connec- tion -30- of the main light switch -31-. In order to disassemblethe side vent, the covering cap -28-, the fastening nut -26- and the inner race -27- of the main light switch -31- can be removed. Removelight switch -31- from the side vent by turning it slightly in clockwisedirection. 8 Removingthe steering column switch cover Undothe fastening screws -32- on the lower steering col- umn switch cover -36- and remove both steering column covers -33, 36 or 35-. 9 Removingthe steering column switch Undothe fastening screw -37- in the cover -38- and the steering column switch -42- and remove. Disconnectthe electrical plug connection. In order to disassemblethe steering column switch -42-, the slip ring -41- can be disconnectedby undoingthe fas- tening screws -39, 40-. See: => Rep. Gr. 695419; Removingand installingthe con- tact unit. 10 Removingthe steeringcolumncover Undothe fastening screw -43- in the steering column cover -44- and unclip the cover upwards.