Linings, insulation 911 Carrera (996) · No. Procedure Instructions

Linings, insulation 911 Carrera (996) No. Procedure Instructions Installingthe regulator for wiping interval => "Installingthe regulator for wiping interval" in 70-1 page 15 Installingthe cigarette lighter => "Installingthe cigarette lighter" in 70-1 page 15 Installingthe inside retaining bracket and Positionthe inside retaining bracket -57- in the dashboard the central vent -1- and secure with the fastening screws -56-. Positionthe central vent -55- in the dashboardand secure with the fastening screws -54-. 2 Installingthe PCMretaining bracket Insert the retaining bracket -52- in the cut-out of the cen- tral vents. Plug the ground cable -53- into the retaining bracket. 3 Installingthe PCM -50- Connectthe electrical plug connection-51- on the rear side of the PCM. See: => Rep. Gr. 911019; Removingand installing display and operator control unit (PCM). 4 Installingthe electrical air-conditioningand See: => Rep.Gr. 870219; Removingand installingthe heating regulator variant -47- and audio, heatingiair-conditioningcontrol. communicationsystem -48- See: => Rep. Gr. 912019; Removingand installingthe car radio. 5 Installingthe switchcovers Plug in the electrical plug connections.(Observethe colour designationof the wiring harness switches). Check the clips -4- and replace if necessary.Clip switch covers -45 and 46- in to the central vent.