rn ! NOt · Before re oving the dashboard,the dashboardmust be disassembled.=> 70-1 "Disassemblingand assembling

911 Carr~ra (996) Linings, insulation rn ! NOt Before re oving the dashboard,the dashboardmust be disassembled.=> 70-1 "Disassemblingand assembling the dash oard" No. Designation Qty. Removal Installation 1 fastening screw 11 Undofasteningscrews-1- Screwin. from the dashboard-5-. 2 ~heetmetalnut 11 Inspectand replace if neces- sary. 3 fasteningscrew 2 Undofastening screws -3- Screwthe dashboard-5- to from the dashboard-5-. the support frame with the fastening screws -3-. 4 fasteningscrew 2 See: Point 5 See: Point 5 5 Dashboard 1 Undofastening screws -3- Positionthe dashboard-5- on from the dashboard-5-. the support frame -19- and tighten the fastening screws -3-. 6 screw 4 See: Point 7A See: Point 7A [astening 7A SA variant, knee protec- 1 Undofastening screw -6- Secure the knee protector or strip from the knee protector strip strip -7A- on the support -7A-. Removethe knee pro- frame -19- and tighten the tector strip. fastening screw -6-, 8 ~ollar nut M6 2 Tighteningtorque:-l0 Nm (7.5 ftlb.)- 9 Holder 1 Secure the holder -9- and screw down with the collar nuts -8-. Tighteningtorque:-l0 Nm (7.5 ftlb.)- 10 ~ollar nut M6 1 Tighteningtorque: -10 Nm (7.5 ftlb.)- 11 $hear-offnut 2 Undothe shear-offnut with Tighteningtorque: -10 Nm special tool 9259 (7.5 ftlb.)- 12 ~irbagcontrolmodule 1 See: =>Rep. Gr. 695319; See: ~ Rep. Gr. 695319; Removingand installingthe Removingand installingthe triggering unit for the airbag. triggering unit for the airbag. 13 ~overpanel 4 Remove Fix the cover panel in the body and the support frame -19- and screw down with the fastening screws -6-, Tighteningtorque:-l0 Nm (7.5 ftlb.)- 14 pheetmetalclip 4 15 Fasteningscrew 4 Tightening torque: -23 Nm (17 ftlb.)- 701819 i Removing and installing the dashboard 70-13 page3 Printed in Germany-44,2001 c7018191