fullymatted.
Back to search
996 Carrera Group 7 Body Equipment, Interior / PAGE 36

& Warning! · Warning! Airbag could inflate. Danger of injury or damage during fitting!

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 36
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Linings, insulation & Warning! Warning! Airbag could inflate. Danger of injury or damage during fitting! .1. Removeignition key2. Disconnectand cover the negative terminal of the battery 3. After the bat- tery is disconnected, assemblywork or work on the vehicle may be started after a waiting period of 1 minute. & Caution! Caution! Damage by bending the bowdencable at the hook. The hook of the bowden cable is pressed into the end piece of the cover for protection during trans- port and assembly. Pull the hook out of the end piece only after installation in the inner door release. Use a plastic spatulato releasethe clipped connection out of the door handleon all sides. Undo fastening screws -2, 3, 4-. 2 Removingplastic cover (airbag) Press the cover out with a narrow screwdriver -5-. Undo the fastening screw seated belowit. Press light -7- out of the door trim panel using a plastic spatula -10-. Disconnect(pull off) electrical plug connection. 3 Disconnectingbowden cable version Band Disconnectelectrical plug connectionfrom the micros- electrical plug connection witch for the door handle-9- and orientation lighting -10-. See: => "Removaland installationof bowden Presslugs of the plastic clip -arrow A- and pull out cable variant A" in 70-19 page 6 towards the rear. Push bowden cable variant B -8- back into the end piece of the sleeve -arrow B-. 4 Removingdoor trim panel Takeexpandingnut out of the door trim panel. Unclip door trim panel out of the door on all sides and lift up and off. Clips -13, 14- must be replaced for assembly. 5 Removingairbag Disconnectelectrical plug connection -IS-. Unscrewfastening screws -16- out of the side airbag and remove. 6 Removingframe Undo fastening screws -18- from the frame -19- 7 Removingdoor film Pull off carefullyon all sides. 8 Removingsound box Disconnectelectrical plug connectionfrom the sound box -21-. Undofastening screws -22- on the sound box -23-. 705919 Removing and installing door trim panel 70-19 page 3 Printed in Germany-44, 2001 c7059191 .

This is a source reference. Confirm exact model applicability in the original material.