fullymatted.
Back to search
996 Carrera Group 7 Body Equipment, Interior / PAGE 38

No. Procedure Instructions · Installingsound box Position sound box -23

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 38
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Linings, insulation No. Procedure Instructions Installingsound box Position sound box -23- in the door. Screwon the sound box with the fastening screws -22-. !. Connectelectrical connection -21-. Stick sliding strip onto the frontI: and rear of => "Fitting sliding strip on the inner door panel"in 70-19 the inner door panel page 7 2 Affix door film.~ "Assemblynote on door Peel off protective film -A- on the door film and position on film for vehicles without side airbag" in the door. Using a roller -8-, press on the door film on all 70-19 page 7 sides -20-. 3 Installingframe Positionthe frame -19- on the sound box. Make sure that the door film cut-outis positioned correctly on the sound box. Screw in fastening screws -18- andtighten. 4 Installingside airbag Positionside airbag -17- on the door and tighten fastening screws -16-. Tighteningtorque:-l0 Nm (7.5 ftlb.)- The fastening screws -16- must be replaced each time they are undone. 5 Engagingbowdencable variantB. Engagebowdencable variantB -7- in the door handle.Pull Connectelectrical plug connection. the hook out of the end piece of the sleeve only after instal- See: => "Removaland installationof bowden lation in the door handle. Clip plastic clip into the door han- cable variantA" in 70-19 page 6 die. Connectelectrical plug connections-8, 9-. 6 Installingdoor trim panel The clips -13, 14- must be replaced everytime the door trim panel is removed. Positionthe door trim panel on the door and clip it in. 7 Positionfastening screws -5- in the door trim panel and tighten. Tighteningtorque: -5.9 Nm (4.5 ftlb.)- Press in plastic cover. Make sure the logo can be read in the correct direction. 8 Installingcover Screwin the fastening screws -2, 3, 4- andtighten. Clip in the cover -1- on the door handle. Additional assembly notes on bowden cable variant A and inner door handle Bowdencables of variant A and inner door handles of variant A can only be installedtogether. 705919 Removing and installing door trim panel 70-19 page 5 Printed in Germany -44,2001 c7059191

This is a source reference. Confirm exact model applicability in the original material.