Group 2 · Engine electronics / PAGE 38Open full manual
Fuel system, electronic injection 911 Carrera (996) · 5. Select "Readcontrol units" and press 15. Thefollow
Add to repair workspace
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Fuel system, electronic injection 911 Carrera (996)
5. Select "Readcontrol units" and press 15. Thefollowingmessageappearson the screen:
the double arrow key [»]. "Inputnew immobilizer code"
Input immobilizer code and press the double
6. Install new DME control module. arrow key [»].
7. Select Program control unit in the Control 16. The followingmessage appearson the screen:
unit programming menu and press "Pleaseconfirm input"
the double arrow key [»]. Confirm input with the [F7] key.
8. Ensure that all requirements requested 17. The followingmessage appearson the screen:
on the screen are fulfilled and then press "Select data record"
the double arrow key [»]. Select data record according to
the allocationtable and press
9, The following message appears on the screen: the double arrow key [»].
"Input Vehicle Ident,Number",
InputVehicle Identification Number and press Thecontrolmodulewill nowbe programmed.
the double arrow key [»], Programmingwill take approx.5 minutes.
Warning:10. The followingmessage appearson the screen: & , > Neverinterruptthe programming "Pleaseconfirm input"
process Confirm input with the [F7] key.
18. The following message will appear after
11. The followingmessage appearson the screen: the programmingtime has elapsed:
"Input old DMEprogramming code" .Programmingwas completed successfully.
Input DME programming code and press Press the double arrow key [»], switch
the double arrow key [»]. the ignition off and then on again.
12. The followingmessage appearson the screen: This completes programming of the DME control
.Pleaseconfirm input" module.
Confirm input with the [F7] key.
13. The followingmessage appearson the screen:
"Input new programming code"
Input new DME programming code and press
the double arrow key [»].
14. The followingmessage appearson the screen:
"Pleaseconfirm input"
Confirm input with the [F7] key.
24 -12 24 70 Programming DME control module
9962411 Printed in Germany -15,1998
This is a source reference. Confirm exact model applicability in the original material.