996 Carrera Group 7 Body Equipment, Interior / PAGE 47
Removing and installing front cowl panel cover · No. Designation Qty. Removal Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Linings, insulation
Removing and installing front cowl panel cover
Note:
No. Designation Qty. Removal Installation
1 Twist lock 2
2 Battery cover 1
3 Torx screw T25 2
M5 x 30
4 Radiatortank cover,right 1
5 Radiator tank cover, left 1
6 Dummy press-in nut 2
7 Cam 2 Unclip Clip in
8 Cap 2 Positionand press in Witha smallscrewdriver
9 T5 plastic nut 2 Check,
replace if necessary
10 Torx screw T20 x 20 3
11 Cover 2
12 Nut 2 Undo Tighteningtorque:
17 Nm (12.5 ftlb.)
13 Left wiper arm 1
14 Right wiper arm
15 Cowl panel cover 1
16 Sheetmetalnut 84.8 3 Adjust to center of hole.
17 Electrical plug connection 2 Press locking tabs together Connect electrical plug
and separate electrical plug connection.
connection.
7022 19 Removing and installing cowl panel cover 70 -27
Printed in Germany -6, 1997 9967025
This is a source reference. Confirm exact model applicability in the original material.