Removing roof lining -cabriolet · Convertible top in service position

911 Carrera (996) Linings, insulation Removing roof lining -cabriolet Note Convertible top in service position Observe the procedure described below in order to avoid damage or destruction of the tension bow seal. Move convertible top rearward by means of the electric motor until the convertible-topcompartmentlid has reached the rear limit position. Move convertible top forward by means of the electric motor until the convertible-topcompartmentlid moves forward. Then interrupt closing operation. Disengageleft and right tension cables and fold up the tension bow. The convertible top must no longer be electrically operated in this position. No. Procedure Instructions Removingconvertible-toplatch Undo T30 x 16 Torx screws, remove convertible-top latch and disconnect electrical plug connection. 2 Detaching headliner at front Pull off sewn-onclamping rail of the headliner of roof frame 1 on roof frame 1 at the front left and right. 3 Detaching headliner at centre Pull off sewn-onclamping rail of the headliner of roof frame 1 on roof frame 1 at the center on the left and right. 4 Detaching headliner at rear Unscrewexpanding nut from the covering strip of roof frame 1 and roof frame 1 at rear. 5 Detaching headlinger Pull headlinerrail from the main bow on the left and right. at the main bow 70 84 19 Removing and installing roof lining -cabriolet 70 -31 Printed in Germany -7, 1998 9967029