996 Carrera Group 7 Body Equipment, Interior / PAGE 72
Linings, insulation · Check or replace sheet metal clips -11-.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Linings, insulation
Check or replace sheet metal clips -11-.
InsertA-pillartrim at the side of the windscreenframe
(transition point to dashboard),clip in the A-pillartrim
-12A-along the roof frame.
2 As of modelyear 2000; Note:
clippingin A-pillartrim before installation,check that the deformation elementis
seated properly-A-.
Check sheetmetalclips -11- and replace if necessary.
Insertthe A-pillartrim -128- at the side of the windscreen
frame (transition point to dashboard),clip in the A-pillar
trim along the roof frame.
3 Clipping in C-pillar trim Check sheetmetalclips -11- and replace if necessary.
Positionand clip in the C-pillartrim -10- on the C-pillar.
4 Up to model year 2000;
installing B-pillartrim -3A- and sash guide Fastenthe B-pillartrim -3A- with the fastening screw -4-.
mount. Position sash guide mount -6- on the B-pillarand fasten
with the hexagon-headbolt -5-.
Tighteningtorque: -50 Nm- (37 ftlb.).
5 As of model year 2000; Push sleeve-9- onto the lug of the B-pillartrim -3B- and
installing B-pillartrim -3B- and sash guide insert in the bottom of the B-pillar.
mount. Fastenthe B-pillartrim -3B- with the fastening screw -4-.
Positionsash guide mount -6- on the B-pillarand tighten
with the hexagon-headbolt -5-.
Tighteningtorque:-50 Nm- (37 ftlb.)
6 Fitting the sash guide retaining bracket Press the peg of the retaining bracket -8- into the hexa-
gon-headbolt bore -5-.
Pushthe cover -7- onto the retaining bracket -4-.
7 Up to model year 2000; Check both sheetmetal clips -13- and replace if neces-
pushingon the clothes hook bracket -lA- sary.
Carefullypress clothes hook bracket -IA- into the sheet-
metal clips -13-of the B-pillartrim -3A-at the bottom.
8 As of model year 2000; Check both sheetmetalclips -13- and replace if neces-
pushingon the clothes hook bracket -18- sary.
Carefullyinsert clothes hook bracket -IB-into the alumin-
ium bracket at the top.
Note:
The clothes hook bracket -IB-must be inserted into the
aliminiumbracket without the use of force, otherwise the
.aliminiumbracket is deformed.
Carefullypress the clothes hook bracket into the sheet-
metal clips -13- of the B-pillartrim -3B- at the bottom.
This is a source reference. Confirm exact model applicability in the original material.
