Removing roof lining · Beforeremovingthe roof lining,the trim of the A, Band C-pillars(Serv.No. 70 57) andthe sliding

911 Carrera (996) Linings, insulation Removing roof lining Beforeremovingthe roof lining,the trim of the A, Band C-pillars(Serv.No. 70 57) andthe sliding roof panel(Serv.No. 6040) mustbe removed. No. Procedure Instructions Removeinteriorlight cover Using a small screwdriverI carefullyunclip both cover lenses at the openingsprovided. Undo fastening screws M5 with a crosshead screwdriver (arrow A). Unclip cover at the rear left and right (arrow8), push forward towards the windscreen and remove. Disconnectthe electrical plug connection of the sliding roof rocker switch and the interior light. 2 Remove sun visors and For removal of sun visors, refer to: ServoNo. 68 23 consoles Insert a small screwdriver into the slot in the cover of the sun visor console and press out. Undo and remove the cross-recessscrewbeneath. 3 Unclip plastic trim at front Undo the Torx screws M6 x 25 in the plastic trim at the front and unclip trim downwardson the left and right out of the wind cowl frame. 4 Detach roof liner at sides Unclip the metal strut of the roof liner from the plastic clips on the right and left. 5 Detach plastic trim at rear Pull the rear plastic trim out of the roof frame evenly on the left and right and detach. 6 Detachmetal strut Pull the middle of the metal strut incorporated in the fabric pocket downwardsuntil it bends. Pull the metal strut out of the console on the left and right. 70 84 19 Removing and installing roof lining 70 -59 Printed in Germany. 18. 1998 9967057