Installing roof lining · No. Procedure Instructions

911 Carrera (996) Linings, insulation Installing roof lining No. Procedure Instructions Note Before installingthe roof lining, perform a visual inspection of the rear plastic trim to ensure that the foam cover and self-adhesivefabric pieces are fully secured to the latching pin. 2 Fitframe Insert the roof frame diagonallyfrom the passenger compartment across the sliding roof aperture. At the same time, pull the front centre of the sliding roof aperture frame backwards, so that the frame overlaps less at the corners and can be inserted in the sliding roof aperture. 3 Detach metal strut Pull the middle of the metal strut incorporated in the fabric pocket downwardsso that it bends. Pull the metal strut out of the console on the left and right. 4 Clip in rear plastic Attach the rear plastic trim to the roof frame evenly trim on the left and right. 5 Engage roof liner Engagemetal strut of roof liner in the plastic clips at sides on the left and right. 6 Clip in front plastic Position front plastic trim left and right againstthe wind trim cowl frame, and clip in. Screw Torx screws M6 x 25 tight. 7 Installconsolesand Position the console against the wind cowl frame, screw sunvisors in the cross-recess screw. Press the cover of the console in until it engages. For installation of sun visors, refer to: ServoNo. 68 23 70 84 19 Removing and installing roof lining 70 -63 Printed in Germany -18, 1998 9967057 1