Removingseat rail cover -2A- Unscrewthe sheetmetal screws out of the seat rail cover · at the front -2A-. Pull seat rai

911 Carrera (996) Seat, frames Removingseat rail cover -2A- Unscrewthe sheetmetal screws out of the seat rail cover at the front -2A-. Pull seat rail cover on front end -2A- out of the right and left seat rails in forward direction. 2 Removingseat rail cover -2B- Insert a screwdriverunder the locking tabs and press lightly upwards. Caution! Locking tabs can break. Pull front seat rail cover -2B-out of the right and left seat rails towards the front. 3 Undoing seat screws at front Move seat to its rear limit position and undo the front MIa x 28 Torx screws -3- from the right and left seat rails using an E12 socket wrench insert. 4 Undoing seat screws at rear Move seat to its front limit position and undo the MIa x 28 Torx screws -3- from the right and left seat rails using an E12 socket wrenchinsert. 5 Disconnectingthe electrical plug connection Releaseplug connector locking device on the side -arrow- and separatethe plug connection--. 720119 Removing and installing front seat 72-1 page 3 Printed in Germany-44,2001 c7201191