Removing GT3 bucket seat · No. Procedure Instructions

911 Carrera (996) Seat frames Removing GT3 bucket seat No. Procedure Instructions 1 Detach belt fitting Pull off cover cap and remove the hexagon head screw of the belt fitting. 2 Remove seat rail cover Move seat to rear limit position. Unscrewthe sheetmetal screws B 3.2 on the left and right out of the seat rail cover. Pull off the cover to the front. 3 Undo seat screws at front Move seat to its rear limit position and undo the front MID x 28 Torx screws from the right and left seat rails using an E 12 socket wrench insert. 4 Undo seat screws at rear Move seat to its front limit position and undo the MIa x 28 Torx screws1rom the right and left seat rails using an E12 socket wrench insert. A foam part (inset) is fitted for the Club Sport version. A bushing is fitted for the Cup racing version. 72 01 19 Removing and installing bucket seat -GT3 72-9 Printed in Germany -25, 1999 996727