27 84 19 Removing and installing cruise-control actuator · Note 5. Loosen

911 Carrera (996) Starter, power supply, cruise control 27 84 19 Removing and installing cruise-control actuator Note 5. Loosen adjusting piece at cruise-control actuator (bayonetlock) and disengage The cruise-controlactuator is fastened with cruise-controlcable. three screws to the pedal bearing block above the accelerator. y D ~ 0 ~.. ~ 213 -96 n 212 -96 A -New snap ring 1. Removeair guide and footwell air vent of the B -Adjusting piece heating and air conditioning system. Remove brake-lightswitch from pedal bearing block. C -Threaded part 2. Only loosenfasteningscrewson the cruise- D -Cruise-control actuator controlactuator. 3. Draw cruise-controlactuator to the rear and extract to the side. Disconnectthe electrical plug connection. 4. Loosen snap ring at adjusting piece (displace it) and push threaded part through along with cruise-controlcable. 27 84 19 Removing and installing cruise-control actuator 27 -5 Printed in Germany, 1997 996271 ~