27 22 19 Removing and installing three-phase generator -GT3 · 1. Disconnectthe battery and cover terminal or

911 Carrera (996) Starter, power supply, cruise control 27 22 19 Removing and installing three-phase generator -GT3 Removal 1. Disconnectthe battery and cover terminal or / ~ battery. Undo the fastening screw for the air //'" cleaner housing and the hose clamp on the air flow sensor. # 2. Disconnect the electrical plug connection on --- the air flow sensor and remove the complete air cleaner assembly. I' j \ ~r .:...~-=-~~ 057_99 7. Undo right fastening screw by three turns. A gentle tap on the fastening screw loosensthe threaded bushing in the three-phasegenerator arm (use aluminiummandrel). Unscrew fastening screw. 8. Removethree-phasegenerator and carefully pull a little to the rear. Press the plug 058_99 connection towards the three-phasegenerator housing,release and pull off. Pull out 3. Relievethe drive belt on the tensioning pulley three-phasegenerator to the rear. and remove the belt. 9. Undo B+ lead on the three-phasegenerator. 4. Removethe deflection roller under the three-phasegenerator. 5. Disconnectthe cable lug of the B+ lead to the three-phasegenerator at the B+ disconnectionpoint. 6. Undo left fastening screw (in direction of travel) and unscrew. 27 22 19 Removing and installing three-phase generator -GT3 27 -9 Printed in Germany -25, 1999 GT3277 ~