Starter, power supply, cruise control 911 Carrera (996) · Removing and installing bracket for generator -GT3

Starter, power supply, cruise control 911 Carrera (996) Removing and installing bracket for generator -GT3 Removal: 2. Removeair cleaner housing. I Caution!Risk of short circuit with battery& Undo hexagon-headbolt M6 x 34. Undo the hose clamps on the throttle body. Remove .connected connector from mass air flow meter. > The battery must be disconnected before any work is carried out on the engine. Draincoplant. Openca~ of coolant expansiontank. Open coolant qrain plugs on left and right and drain the cool~nt. After draining the coolant, fit new sealing rings on the drain plugs. Tightenin~torque: 10 to 15 Nm (7.5 to 11 Nm) (the illustration shows only one drain plug) 058_99 3. Removedrive belt (refer to service No. 13 78 19). 4. Unclipthe cable from the air flow sensor on the reservoir of the hydraulic pump and lay it aside. Detach oil filler neck from the holder. 186_99 27 -12 27 27 19 Removing and installing bracket for generator -GT3 9962711 Printed in Germany -29, 1999