No. Procedure Instructions · 5 Aligning fuel level sensor Insert fuel level sensor

911 Carrera 4 (996) Fuel supply, control No. Procedure Instructions 5 Aligning fuel level sensor Insert fuel level sensor and align or turn until the arrow marking on the fuel level sensor is aligned with the line marking on the fuel tank. 6 Fitting union nut Tighten union nut with socket wrench (special tool 3217) (VWjAudi). Tighteningtorque with new union nut and new sealing ring 70 Nm (52 ftlb.). The following tightening method must be used if the sealing ring and union nut are re-used: Before removal, mark the position of the union nut with respect to the fuel tank in colour. Perform assembly work, fit sealing ring and union nut. Use socket wrench to tighten union nut up to the marking. From this position,turn the union nut approx. one rib further. Fitting fuel lines and electrical Attach fuel lines and electrical plug connection.The fuel plug connection lines must audibly engage, Correct engagementmust be checked with a gentle pull. The colour-codedplug (green) must be fitted to the connectionidentified with "V", Note on procedure No.2: Installing sucking jet pumps -Page 20 -110 2066 19 Removing and installing fuel pump (911 Carrera 4) 20 -109 Printed in Germany -28, 1999 99620101