Group 2 · Engine electronics / PAGE 105Open full manual
Fuel supply, control 911 Carrera 4 (996) · Installation
Add to repair workspace
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Fuel supply, control 911 Carrera 4 (996)
Installation
1. Engage cable guide into the bracket. 4. Fitair duct.
Then pull slightly to ensure that
the connection is properly locked.
2. Fasten the accelerator pedal.
Tightening torque of the countersunk
screw (M5 x 55) 2.8 Nm :!: 10 %
(2.0 ftlb. :!: 10 %)
3. Engage cable in the cable disc, insert
the pedal encoder in the stud and fasten
with two hexagon nuts.
Tighteningtorque 8 -9 Nm (6.0 -6.5 ftlb).
383_98
382_98
20 -114 208019 Removing and installing accelerator pedal
99620113 Printed in Germany -15,1998
This is a source reference. Confirm exact model applicability in the original material.