3. Set the steering column switch: · Measurewith a depth gauge between end of

3. Set the steering column switch: Measurewith a depth gauge between end of steering shaft and steering-columnswitch cover plate (see figure). Adjustment dimension 55 :t 0.5 mm 0 --- 55' '0,5 115.96 4. Replace gasket between current distributor and firewall if necessary. After the current distributor is mounted on the firewall (tighten- ing torque 15 Nm (11 ftlb.)) the battery cable is tightened with a new hexagon nut M8. Tighteningtorque: 15 Nm (11 ftlb.) 5. The heat exchanger is connected to the engine cooling system, and coolant flows through it when the engine is running. After removing or installing the heating/fresh-air control, vent the cooling system (see Repair Group 19). ~rt: