Automatic clutch -Torque converter 911 Carrera (996) · Notes on removal and installation

Automatic clutch -Torque converter 911 Carrera (996) Notes on removal and installation Removal I 1. Remove multi-fuction switch (refer to 2. Hold the converter in installationposition with service No. 37 35 19). special tool 9595/1 (long). 2. Withtransmissionin horizontalposition, carefullyremovethe converter. Installation Note Check converter hub for traces of scoring, In the event of damage or faults, the complete converter must be replaced. 97-333 Note If the installed position of the converter is incorrect, the ATF pump can be destroyed when the transmission is flange:mounted to the engine. 237-96 1. Carefullypush converter onto transmission shaft as far as the first stop. Then press converter by hand into the converter bell housing and turn it until the recess in the converter hub engages in the driver of the impeller and the converter perceptibly slides inward. 32 -A2 32 50 19 Removing and installing torque converter 99632Al Printed in Germany -5, 1997