996 Carrera Group 3 Automatic Transmission — 911uk Edition / PAGE 49
37 58 19 Removing and installing ATF filter · 1. Placeoil collectionpan underthe transmission. 4. RemoveATFfilter.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Automatic transmission -Actuation, ass. housing
37 58 19 Removing and installing ATF filter
Removal
1. Placeoil collectionpan underthe transmission. 4. RemoveATFfilter.
2. UnscrewATF drain screw (1) and drain ATF.
97-283
97.187 Installation
1. Thinly coat gasket on the suction collar of
Note the ATF filter with Vaselineand installfilter,
Without ATF,the engine must not be started and
the vehicle must not be towed. 2. CleanATFpan.
3. RemoveATF pan (loosen screws crosswise). 3. Clean all four magnets and place them in the
seams of the ATF pan (they must lie flat over
their entire surface).
4. FitATFpanwith newseal.Tightenthe screws
crosswisein severalstages.
5. Replace sealing ring for ATF drain plug and
tighten plug to 40 Nm (30 ftlb.).
6. Fill in ATF (refer to Service No. 37 02 35).
37 58 19 Removing and installing ATF filter 37 -A29
Printed in Germany -4, 1997 99637A23
This is a source reference. Confirm exact model applicability in the original material.