996 Carrera Group 3 Automatic Transmission — 911uk Edition / PAGE 54
Automatic trarlsmission -Actuation, ass. housing 911 Carrera (996) · Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Automatic trarlsmission -Actuation, ass. housing 911 Carrera (996)
Installation
1. Put multi.functionswitch on the selector shaft.
The flat point on the serrations in the switch
"A" must lie against the flat point on the se.
lector shaft "8".
97.184-1
Note
Place multi-functionswitch on the selector shaft.
Do not tilt or use force: you may damage the
switch contacts.
2. Turn switch until the fitting bore on the switch
housing can be put on the dowel pin on the
transmissionhousing.
3. Replacesealingringsfor ATFline and
installATFline.
Tightening torques:
Multi-functionswitch to
transmission housing (M6) = 8 Nm(6.0 ftlb.)
Bracket for ATF lines to
transmission housing (M6) = 23 Nm (17 ftlb.)
37 -A34 37 31 19 Removing and installing multi-function switch
99637A23 Printed in Germany -4. 1997
This is a source reference. Confirm exact model applicability in the original material.