For the remaining four fastening screws, remove · special tool 9595/1, rotate crankshaftthrough

911 Carrera (996) Automatic transmission -Actuation, ass. housing Note For the remaining four fastening screws, remove special tool 9595/1, rotate crankshaftthrough a further 1200 in each case (to pulley marking U4, U5 or U6) and fix again. 7. Remove underbody covers (centre and rear) and side covers (rear left and right). 8. Pull off vacuum pipe (8) at switch-overvalve. 336_97 12. Unscrewthe lower fastening screws on the transmission bell housing. A 13. Secure the engine in installationposition with holding device. To do this, fasten special tool 9624/1 with four screws and turn the thrust '""'" \. screw until the pressure disc is in contact \\, ~ B with the crankcase. \. \ 304_97 ~ 9. Unscrew stabilizer at the side parts of .~, ~\ the rear-axlesupport. C e 10. Removecross member (A), diagonal braces /~ (8) and rear-axle support (C). ~ 97-132 14. Uncoupledriveshaftson the transmission side. 15. Place collection pan under the transmission, 37 35 19 Removing and installing Tiptronic transmission A 96/00 37 -A39 Printed in Germany. 5, 1997 99637A37 ~/.,~