8. Remove differential. Tightening torques: · Diagonalbraces

8. Remove differential. Tightening torques: Diagonalbraces ;V r--- to body (MID) = 65 Nm (48 ftlb.) Diagonal braces to cross member (M12) = 100 Nm (74 ftlb.; Diagonal braces carrier side member (nut) = 23 Nm (17 ftlb.: (1) Short flanged shaft to transmission (M8) = 25 Nm (18 ftlb.) Cover for final drive 232 -97 to transmission (M8) = 23 Nm (17 ftlb.) Drive shaft to transmission9. Removetapered roller bearing outer ring and flange (M1 0) = 81 (60 ftlb.) adjusting shim from the transmission housing. Wheelto wheel hub = 130 Nm (96 ftlb.)Note The adjusting shim is calibrated and cannot be Connecting rod to replaced by another shim. spring strut = 46 Nm (34 ftlb. Rear axle carrier to Installation carrier side member (M12) = 100 Nm (74 ftlb. 1. Fit new toroidal sealing ring untwisted and coat with transmission oil. 2. Fit cover and tighten in diagonallyopposite sequence in several stages. 3. Add transmission oil for final drive (see Page 39 -AI). 39 -A4 39 09 19 Removing and installing differential 99639Al Printed in Germany. 1997