Manufacturer's Certificate · 64/20 ENU 4440 4

911 (996) Manufacturer's Certificate 64/20 ENU 4440 4 Arrow with inscription = directional mounting “Rotation” "Inside/Outside" inscription = mounting on specified side only Arrow with both = directional mounting on specified side only inscriptions “Rotation” and “Inside/Outside” Information If a tire is damaged and it is not possible to determine with absolute certainty that there is no ply damage - with all of its consequences - or if the tire was thermally and/or mechanically overloaded due to a loss of pressure or other prior damage, replace the tire in question for safety reasons. Repairs to "V", "W", "Y" and "ZR" tires are not permissable, as well as the use of inner tubes in tubeless tires. Please inform your customers accordingly. It is advisable to mount winter tires at temperatures below 45° F/7°C , because the driving characteristics of summer tires are reduced at low temperatures. Extremely low temperatures can cause permanent damage to summer tires. WARNING Incorrect tire pressure • Uncontrollable vehicle handling  Adjust the tire pressure according to specifications. Never allow the pressure to fall below the minimum pressure.  Check age of tires. Replace tires that are more than 6 years old.  Perform visual inspections.  Use new rubber valves at every tire change.  Use only tires approved by Porsche. Tire Pressure: 17-inch wheels 18-inch wheels Spare wheel/collapsible wheel Front axle 2.5 bar (36 psi) 2.5 bar (36 psi) 4.2/2.5 bar (61/36 psi) Rear axle 2.5 bar (36 psi) 3.0 bar (44 psi) 4.2/2.5 bar (61/36 psi) AfterSales PageJul 30,3 2021of 22