Technical Information · 170/23ENU 6471 6

911 (996) Technical Information 170/23ENU 6471 6 Work Procedure: 1 Disconnect the battery! The conversion is described on the left side. No vehicle electrical system voltage may be applied when reconnecting the wire harness! 2 Disconnecting plug connection Insert wire harness through opening and remove connector housingRemoving connector housing -A- Pull out contacts and mark the pin assignment for each cable Example: Pin 1 old connector housing is used in pin 1 new connector housing Disconnect the cable as close to the plug contact as possible. Removing connector housing 3 Plug in wire harness rod on the vehicle side with new connector housing (scope of delivery) Push new rubber seals onto the individual cables crimp new plug contacts on wiring harness (vehicle side)Pin plug connection -1- and push into connector housing Pin assignment Pin plug connection Wire harness on left Wire harness on right Function driver's side passenger side 1 red grey 1 red grey Terminal 30 AfterSales SepPage18,3 2024of 5