fullymatted.
Back to search
Group 9 · Electrics / PAGE 36

87 55 19 Removing and installing the fluid tank · Removal Note

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 36
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Air conditioning 87 55 19 Removing and installing the fluid tank Removal Note 1. Removethe cover above the heating/air-con- The fluid tank must be replaced if the system ditioning system and fluid tank. suffers from operationalfaults (e.g. accident damage or air-conditioningsystem depressur- 2. Removethe refrigerant by suction using the ized). service unit. Refrigerantoil removed from a previouslyrun air- 3. Undo the hose clamp on the fluid tank. Undo conditioningsystem may no longer be used both hexagon-headbolts on the fluid tank and (special-categorywaste), remove the fluid tank upwards. Immediately close lines with plugs so that they are air-tight. 3.96 Installation 1. Do not remove plugs until shortly before installation.Replacethe O-ringon the branch piece and on the refrigerant line, and wet the new O-ringswith refrigerant oil. 2. Tighten both hexagon-headbolts on fluid tank with 6 Nm (4.5 ftlb). 3. Determine the quantity of the refrigerant oil and fill up again with refrigerant oil (volume removed by suction + 30 cm3). 87 55 19 Removing and installing the fluid tank 87 -17 Printed in Germany. 1997 996871

This is a source reference. Confirm exact model applicability in the original material.