STEP STEP · 13 14

STEP STEP 13 14 Using two flatblade screwdrivers, gently and evenly Using a pair of snap ring pliers, remove IMS bearing lever off the IMS bearing flange, then remove from snap ring. engine. You should not have to apply excess force to remove the flange! Dual row bearings do not have an external snap ring. NOTE NOTE Placing your finger or a flatblade screwdriver in the center of If the flange does not come off easily, either you did not remove the snap ring when removing it, will prevent it from falling into all three tensioners or the cam timing is off. the crankcase. TIP TIP INSTALLATIONINSTALLATIONMANUALMANUAL PAGE 7