IMS Solution Installation Manual — LN Engineering / PAGE 14
15 Next, using a 10mm (3/8 in) drillbit, drill the final hole in the crank case. · Once the hole is drilled, clean the metal sh
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
15 Next, using a 10mm (3/8 in) drillbit, drill the final hole in the crank case.
Once the hole is drilled, clean the metal shavings from crank case.
NOTE
16 Next, using a handsaw, cut two straight lines into drilled holes to remove outer piece of crank case.
This is a source reference. Confirm exact model applicability in the original material.