25 Using IMS Pro Tool Kit puller, extract bearing from intermediate shaft. · Hold threaded rod still while tightening nut on pul

25 Using IMS Pro Tool Kit puller, extract bearing from intermediate shaft. Hold threaded rod still while tightening nut on puller to extract bearing from intermediate shaft. Once bearing is extracted, thoroughly clean the inside of the intermediate shaft using a lint-free cloth. NOTE If the center stud breaks during extraction, use the ez-out tool to remove bearing from center race after knocking the center stud into the IMS tube. It can be extracted later with a telescopic magnet. NOTE Watch for an oil release when the IMS Bearing is extracted. TIP Once clean, install intermediate shaft plug. Place plug into intermediate shaft...26 If using an 06-08 adapter bushing with your IMS Solution, please use the provided IMS plug from the 06-08 adapter kit. Plug must be installled prior to adapter bushing! NOTE