IMS Solution Installation Manual — LN Engineering / PAGE 21
29 Next,PlaceinstallIMS solutionthe IMSbearingSolutionontobearingstud.forTheninstallationtake the intobearingthe intermediateins
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
29 Next,PlaceinstallIMS solutionthe IMSbearingSolutionontobearingstud.forTheninstallationtake the intobearingthe intermediateinstaller fromshaft.the
IMS pro tool kit and place it onto bearing.
Some drivers will not allow fitting the 12-pt nut. Fitting of nut not necessary.
NOTE
Secure into place using a IMS flange nut. Do not over tighten. Finger tighten ONLY.
NOTE
The Faultless IMS Tool can be used to install the new bearing. If installing the bearing conventionally,
placing the bearing in the freezer will make installation easier as the part will contract some when cold.
TIP
30 Usingbeforesuppliedinstalling.assemblyAlign IMSlube,Solutionlubricatebearingthe outsidewith intermediateIMS Solutionshaft.bearing
The o-ring located at the bottom of the center stud must remain there. It seals against the snout
of the IMS flange. Do not remove this o-ring.
NOTE
This is a source reference. Confirm exact model applicability in the original material.