37 Lubricate IMS Solution flange O ring using supplied assembly lube. · If the IMS housing bore in the block is damaged or the c

37 Lubricate IMS Solution flange O ring using supplied assembly lube. If the IMS housing bore in the block is damaged or the case shows signs of porosity, it is acceptable to use a non-hardening sealant (such as Curil-T) on the IMS flange. NOTE 38 Usingflange assemblyinto bearinglube,by lubricatehand. ThenIMSusingSolutiona softbearingface hammer,and installlightlyIMStapsolutionthe IMS Solution flange until it is flush with crank case. During assembly, ensure the o-ring inside the IMS Solution flange and the seal on the outer diameter of the IMS Solution flange are not cut or pinched.