IMS Solution Installation Manual — LN Engineering / PAGE 27
41 UsingDo notatorquewrenchnutandyet.a flat blade screwdriver, install IMS flange center stud nut. · 42 OnceOnce centerthe IMS
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
41 UsingDo notatorquewrenchnutandyet.a flat blade screwdriver, install IMS flange center stud nut.
42 OnceOnce centerthe IMSstudflangenutboltshas beenhave abeeninstalledtorqued,fingertorquetight,thetorqueIMS IMSflangeflangecenterbolts.nut.
IMS flange fastener torque: 10Nm(7ft-lb)
NOTE
Center IMS flange nut torque must be at least 12 ft/ lb, but not to exceed 20 ft/lb. Loctite can be used on
the threads of the 12 pt nut. Blue or green wicking Loctite can be used.
NOTE
This is a source reference. Confirm exact model applicability in the original material.