IMS Solution Installation Manual — LN Engineering / PAGE 38
APPENDIXSTEP B · POSITIONING OF THE OIL PORT
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
APPENDIXSTEP B
POSITIONING OF THE OIL PORT
STEP 1: Use a degree wheel to determine how
many degrees the adapter needs to be
re-clocked. You can cut out and use the degree
wheel attached here.
STEP 2: Using the table below determine the required thickness of the shim. Contact
LN Engineering LLC to receive your shim free of charge.
Required rotaƟon Shim thickness (inch)
30 deg .010
60 deg .020
90 deg .030
120 deg .040
150 deg .050
LN Engineering LLC
125 Gladiolus St, Momence, IL 60954
Phone: 815-472-2939
email: support@lnengineering.com
This is a source reference. Confirm exact model applicability in the original material.