996 Rear Axle Coil Spring Replacement — Porsche 20/17 / PAGE 3
Technical Information · 20/17 ENU 4272 4
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 (996)
Technical Information
20/17 ENU 4272 4
WARNING
Preloaded or pressurized components
• Risk of pinching or bruising
Do not reach into the danger area.
Relieve the tension on components before starting work.
Secure components to prevent them from loosening suddenly.
1.3 Disassemble rear spring strut (Workshop Manual '42 Disassembling and assembling rear
spring strut').
Information
• When installing new parts, refer to the allocations described in the Porsche Electronic Parts
Catalog (PET).
• A different spring plate (compensation part) than the one used before may have to be used.
2 Assembling spring strut
Exploded view of spring strut on rear axle
1 – Shock absorber
2 – Circlip
3 – Concave washer (lower)
4 – Coil spring (new)
5 – Protective bellows
6 – Additional spring
7 – Washer
8 – Stop plate (identical part)
9 – Spring plate
10 – Spring plate (compensation part),
depending on coil spring – if required (new)
11 – Supporting mount (identical part left/right)
12 – Lock nut, M12 x 1.5 (new)
Figure 1
AfterSales JunPage7, 32019of 7
This is a source reference. Confirm exact model applicability in the original material.