87 69 19 Removingand installing ballast resistor for fan motor · The ballast resistor is available as a spare part 6. U

911 Carrera (996) Air conditioning 87 69 19 Removingand installing ballast resistor for fan motor Note The ballast resistor is available as a spare part 6. Using a commerciallyavailablecrimpirlg tool, and can be replaced by crimping it onto the old join the wires with crimp connectors. wires, 7. After crimping, solder the crimp connectors. 1. Disconnectthe batteryand coverthe terminal Slide heat-shrinktubing over the crimp con- or battery. nectors and then shrink the tubing with a hot- air gun. 2. Unclip ballast resistor from the holder from below. 8. Carefullyroutethe wires and,if necessary,fix in placewith plastictape. ~ ~ 645 -96 3. Cut off wires approx. 30 mm behind the old ballast resistor. 4. Slide heat-shrinktubing over the wires to the plug connection (2 x) and to the fan mo- t9r (I x). 5. Shortenwires of the newballastresistorto approx. 30 mm and strip approx. 5 mm of insulationoff all wire ends. 87 69 19 Removing and installing ballast resistor for fan motor 87 -47 Printed in Germany, 1997 9968733