996 Turbo diagnostic manual — Turbo applicability only / PAGE 76
45-10Fault code 4206 · Speed sensor, front left
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
45
911 Turbo (996) PSM 5.7
45-10Fault code 4206
Speed sensor, front left
Incorrect signal from speed sensor
Diagnostic conditions
• Vehicle speed > 40 km/h (25 mph) for min. 40 s.
Possible cause of fault
♦Toothed ring/speed sensor soiled or damaged, wheel-bearing
play too great
♦Pick-up due to faulty shield
♦Speed sensor faulty
♦Control unit faulty
Affected pins
Pin 12 and pin 28
Diagnosis/troubleshooting
Work instruction Display OK If not OK
1 Visual inspection ♦Examine speed sensor and Step 2 ♦Repair speed
lead at the front left for external sensor and
damage. lead.
♦Check speed sensor plug for ♦Repair speed
corrosion. sensor plug.
→ End
2 Checking speed sensors ♦Ignition off. 1 kΩ to 3 kΩ > 3 kΩ or < 1 kΩ
♦Disconnect plug from speed Step 3 Step 9
sensor.
♦Measure resistance between
pin 1 and pin 2 on speed sen-
sor.
3 Checking function of ♦Ignition off. Measureable AC volt- No AC voltage
speed sensor ♦Set AC measuring range on the age, approx. same measureable.
level as to speed Step 5 multimeter.
sensor of an oppo-
♦Jack the vehicle up and turn the site wheel at same
front left wheel by hand. wheel speed.
♦Measure voltage between pin 4 Step 5
and pin 5 of speed sensor.
4503 Fault code 4206 45-10 page 1
Printed in Germany – 29, 2002 4206ps05
This is a source reference. Confirm exact model applicability in the original material.
