fullymatted.
Back to search
996 Turbo diagnostic manual — Turbo applicability only / PAGE 80

45-12Fault code 4211 · Speed sensor, rear right

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 80
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

45 911 Turbo (996) PSM 5.7 45-12Fault code 4211 Speed sensor, rear right Incorrect signal from speed sensor Diagnostic conditions • Vehicle speed > 40 km/h (25 mph) for min. 40 s. Possible cause of fault ♦Pulse ring/speed sensor soiled or damaged, wheel-bearing play too great ♦Pick-up due to faulty shield ♦Speed sensor faulty ♦Control unit faulty Affected pins Pin 30 and pin 31 Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Visual inspection ♦Examine speed sensor and Step 2 ♦Repair speed lead at the rear right for exter- sensor and nal damage. lead. ♦Check speed sensor plug for ♦Repair speed corrosion. sensor plug. → End 2 Checking speed sensors ♦Ignition off. 1 kΩ to 3 kΩ > 3 kΩ or < 1 kΩ ♦Disconnect plug from speed Step 3 Step 9 sensor. ♦Measure resistance between pin 1 and pin 2 on speed sen- sor. 3 Checking function of ♦Ignition off. Measureable AC volt- No AC voltage speed sensor ♦Set AC measuring range on the age, approx. same measureable. level as to speed Step 5 multimeter. sensor of an oppo- ♦Jack the vehicle up and turn the site wheel at same rear right wheel by hand. wheel speed. ♦Measure voltage between pin 4 Step 5 and pin 5 of speed sensor. 4503 Fault code 4211 45-12 page 1 Printed in Germany – 29, 2002 4211ps05

This is a source reference. Confirm exact model applicability in the original material.