996 Turbo diagnostic manual — Turbo applicability only / PAGE 123
45-42Fault code 5505 · Electrical system (steering angle sensor)
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Turbo (996) PSM 05 45
45-42Fault code 5505
Electrical system (steering angle sensor)
Diagnostic conditions
• Ignition on
• The fault is stored in the event of a fault in the electrical system
of the steering angle sensor or in case of a voltage drop.
Possible cause of fault
♦Wiring faulty
♦Voltage drop/weak battery
♦Steering angle sensor faulty
Affected terminals
Terminals 21 and 39
Diagnosis/troubleshooting
Note!
Erase fault memory and carry out a test drive.
Work instruction Display OK If not OK
1 Check calibration of the ♦Calibrate steering angle sensor Calibration was ⇒ Step 2
steering angle sensor incorrect
→ End
2 Check power supply of ♦Switch off ignition > 11 V Open circuit
the steering angle sensor ⇒ Step 3 between PSM con- ♦Pull off steering angle sensor
trol module plug pin plug
39 and pin 3 of the
♦Switch on ignition steering angle sen-
♦Measure voltage between pin 3 sor plug, or PSM
of steering angle sensor plug contol module faulty
and ground → End
3 Check ground of the ♦Measure voltage between pin 3 > 11 V Open circuit
steering angle sensor of the steering angle sensor ⇒ Step 4 between PSM con-
plug and pin 4 of the steering trol module plug pin
angle sensor plug 21 and pin 4 of the
steering angle sen-
sor plug, or PSM
contol module faulty
→ End
4503 Fault code 5505 45-42 page 1
Printed in Germany – 4, 2001 5505ps05
This is a source reference. Confirm exact model applicability in the original material.
