69-9Fault codes 4, 5, 20, 21, 36 · Ignition circuit, driver

911 Turbo (996) Airbag B05 69 69-9Fault codes 4, 5, 20, 21, 36 Ignition circuit, driver Diagnostic conditions • Ignition on Possible cause of fault ♦Short circuit to B+/ground or open circuit in the wiring between the driver’s airbag unit and the airbag triggering unit ♦ Driver’s airbag unit faulty ♦Triggering unit for airbag faulty Affected terminals Terminals 10 and 11 Note! If the fault memory is cleared, the ignition must be switched off, the ignition key removed and the ignition switched on again in order to check the fault path. Only in this way is another self-test carried out. Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Remove driver’s airbag unit. ⇒ Step 2 2 Check driver’s airbag unit ♦Attach the test tool Replace airbag unit ⇒ Step 3 No. 9516 instead of the air- → End bag unit. ♦Erase fault memory ♦Switch off ignition ♦Remove ignition key ♦Switch on ignition ♦Read out fault memory 6901 Fault codes 4, 5, 20, 21, 36 69-9 page 1 Printed in Germany – 20, 2002 4xxxxB05