Danger of personal injury from control modules whose trans- · port lock is activated.

Danger of personal injury from control modules whose trans- port lock is activated. The roll-over protection system can only be activated safely when the transport protection system is not activated. ♦After installing a new control module, do not start the vehicle until the transport protection system has been switched to ’inactive’. ♦After transporting a vehicle, do not start the vehicle until the transport protection system has been switched to ’inactive’. Danger of personal injury from control modules whose trans- port lock is activated. The roll-over protection system can only be activated safely when the transport protection system is activated. ♦Before removing the control module, remove the vehicle key from the ignition lock and pull off the plug on the con- trol module. Danger of damage to goods by transporting vehicles whose transport lock is not activated. The roll-over protection system can be activated unintention- ally if the transport lock is not active during transportation. ♦Before transporting the vehicle, switch the transport lock to ’active’. Danger of damage due to improper handling of batteries and control module plug connections! This may cause malfunctions and system failures! ♦Disconnect the battery connection terminals only when the engine is switched off! ♦Start the engine only when the battery connection termi- nals are properly connected! & ! " #$% &''#