Radio, telephone, on-board computer, navigation 911 Carrera (996) · Removal I

Radio, telephone, on-board computer, navigation 911 Carrera (996) Removal Installation 1. Take off rear ~jpoiler.Pull off electrical plug connection. Priesstogether retaining spring at Note top and pull off. Always fit the isolating ring (Figure B) before in- stalling the sensor (Figure A)-The smooth sur- face of the isolating ring faces the sensor. 0 411.97 2. Slightly bend up the holding peg on the sen- 40- 97 sor housing and push out the sensor. 1. Fit isolating ring and push sensor into the sen- sor housing. 2. Slide retaining spring over the sensor housing and press on until it meets the stop. 3. Engage electrical plug connections and install fit rear spoiler. Note The electrical plug connection in the vehicle must always point to the centre of the vehicle. Plug connection with marking (white adhesive tape) on the wiring harness alwaysconnected to 412.97 outer left sensor. 3. The washer relmainsover the sensor housing on the rear spoiler. Removeisolating ring from the sensor. 91-4 91 75 19 Removing and installing sensor for ParkAssistent 996913 Printed in Germany -4, 1997