72Seat memory S02; S03; · 72-1Introduction

911 Turbo (996) Seat memory S02; S03; 72 72Seat memory S02; S03; 72-1Introduction The manual contains the diagnosis for the following system: Seat memory system S02; S03; General instructions/safety instructions The following points must be observed during vehicle diagnosis: ♦The stored seat and mirror positions are retained after the bat- tery is disconnected. ♦After the battery is connected, volatile memories must be re-pro- grammed. In the case of radio coding and tuning, the customer must be informed of decoding and the deleted tuner memory. ♦After the battery has been connected, the instructions in the assembly 9; Rep. Gr. - ; Work instructions after disconnecting the battery must be observed. ♦After troubleshooting or repairs, erase the fault memory with the 9588 Porsche System Tester ll and then read out the fault mem- ory again. Caution! Danger of injury and damage due to improper handling of the battery and control module connectors! • Never disconnect battery with engine running. • Never start engine unless battery is connected securely. • Never pull off or push on plug connections for the control modules or other electronic components when the ignition is switched on. General information on the fault memory Fault code setting conditions Fault codes can be set in several circumstances, e.g.: ♦Power failure ♦Plug connections disconnected 7298 Introduction 72-1 page 1 Printed in Germany – 42, 2003 Ein_XS02