91 10 19 Removing and installing display and operator control unit (PCMJ · Old version New version

911 Carrera (996) Radio, telephone, on-board computer, navigation 91 10 19 Removing and installing display and operator control unit (PCMJ Removal Old version New version 1. Unclip switch covers from below and 1. Unclip the switch covers from below and disconne<:telectrical plug connections. let them dangle from the electric leads. 2. Press together both spring clamps on the display and operator control unit and carefullypull out. "... I," --c=:s- C)I ~ .;.-., C) C) \(Q.~~:~~:~::::~! ! -- 728_97 733_97 2. Detach arid remove the central vent 3. Disconnectelectrical plug connectionsfrom (4 Torx s(:rews 5.0 x 22) at the centre vent. the display and operator control unit. Carefullypull out the display and operator control unit and disconnect the electrical plug connections. Note The mounting points on the display and operator control unit for fastening it in the retaining bracket were modified in the current model year. The retaining bracket was adapted accordingly. As the result of the modification, the previouslyinstalled retaining bracket (end digits 00) must be exchangedfor the new retaining bracket (01). The new retaining bracket is includedwith the new display and operator control unit. 91 10 19 Removing and installing display and operator control unit (PCM) 91 -7 Printed in Germany -8, 1998 996917 {'.-