72-5Control unit function · Modifying coding

911 Turbo (996) Seat memory S02; S03; 72 72-5Control unit function Modifying coding Caution! Risk of damage to backrest if automatic lumbar control is performed after unlocking the vehicle with hand-held trans- mitter ♦After replacing the control module, deactivate the required lumbar position in the "Modify coding" menu item. The following settings can be selected in the menu and coded using the "Modify coding" menu item: Coding Setting Function Upper lumbar Present/not present Lower lumbar Present/not present Required position for Activated/deactivated Depending on the coding, the required lum- lumbar bar position is activated or deactivated when the vehicle is unlocked using the hand-held transmitter. If the required lum- bar position is coded to "deactivated", only the stored seat and mirror positions are set when the vehicle is unlocked using the hand-held transmitter. Parking aid on rearview Right/left Depending on the coding, the right or left mirror rearview mirror is lowered by the set angle when reverse gear is engaged with the parking aid active. Lowering 10 to 120 degrees Lowering angle of the coded rearview mir- Factory setting: 32 ror Delay for reverse gear 0 to 5,100 ms Delay time after which the rearview mirror Factory setting: 1,280 ms lowers when reverse gear is engaged. Parking aid for position Activated/deactivated Parking aid is activated/deactivated for button 1 position button 1 (switch for memory seat adjustment). Parking aid for position Activated/deactivated Parking aid is activated/deactivated for button 2 position button 2 (switch for memory seat adjustment). Parking aid for position Activated/deactivated Parking aid is activated/deactivated for button 3 position button 3 (switch for memory seat adjustment). 7298 Control unit function 72-5 page 1 Printed in Germany – 42, 2003 SGF_XS02