Air conditioning H01, H02 911 Turbo (996)80 · ♦power failure

Air conditioning H01, H02 911 Turbo (996)80 ♦power failure ♦etc. In these circumstances, no fault is present in the system and the fault memory must be erased. Fault memory Info key F8 In order to be able to assess the fault exactly, the fault memory Info key F8 must be pressed. This information should be saved using the Save key F4 and printed out. If a fault code is stored with "not present" status and no other problems are present, then the fault memory must be erased. After completing repair work, read out fault memory, press Info key, switch off ignition and switch on again. After a short period, the fault memory text goes from "present" to "not present", if the fault has actually been remedied. Open circuit - short to ground / voltage short / version; vehicle parameters / counter Open circuit or short to ground: There is (present) or was (not present) a short circuit to ground or an open cir- cuit in the circuit to the control module terminal. Voltage short: There is (present) or was (not present) a short circuit to voltage. 80-1 page 2 8001 Introduction ein_xh02 Printed in Germany – 15, 2001