Air conditioning H02 911 Carrera (996)80 · ♦The A/C circuit is tested via the DME.

Air conditioning H02 911 Carrera (996)80 ♦The A/C circuit is tested via the DME. ♦All fault paths are tested, and any faults are stored. 3. After the System test is finished, the followng text appears ’System test completed successfully. Display fault memory with the [>>] button.’. 4. Then press the >> key, and if necessary remedy the displayed fault. After the system test, the air conditioning system regulator reverts to the state it was in before the test was carried out. Modify coding This menu item is used to retrieve and change the coding of the fol- lowing functions: Coding Setting Function Japan coding Active/ not active In the coding for Japan, air recirculation is Recirculating function switched on constantly even when external temperatures are < 3°C (also no automatic resetting after ignition off 20 minutes) Pollen filter Present/not present AC symbol Active / not active The AC symbol can be hidden in the dis- play. PCM Installed /not installed Vehicles without PCM or with PCM2 must be coded as 'not installed'! Procedure: 1. Select the menu item ’Modify coding’ using the Porsche Sys- tem Tester ll No. 9588. (The table listed above appears.) 2. The display can be saved using the F4 key. 3. Using the buttons ↑ and ↓ select the coding to be modified and continue using the >> button. 4. Using the buttons ↑ and ↓ select the correct coding and con- firm using the ’Coding’ ( F8 ) button. 5. The upper right display changes to the new coding. 6. For coding overview, return using the button << . 7. Select another coding (see Step 3) or end the procedure using the button << . 80-D55 page 2 8001 Control module function SGF_H02 Printed in Germany – 78, 2003