Group 9 · Electrics / PAGE 96
92 15 19 Removingand installing the wiper motor · Removal Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
92 15 19 Removingand installing the wiper motor
Removal Installation
1. Removethe covers above the battery and 1. Wiper motor in parking position. Fit the link.
fluid tank. Disconnectthe battery and cover The installationposition is identified by a a
the terminal or battery. marking (parking position) on the console.
2. Undo the fastening nut of the link. Whendoing
so, hold in position using an open-endspanner
(width across flats 21 mm). Removethe link.
3. Undo the fastening screws on the wiper motor
(3 screws M6) and the lower fastening screw
on the body. Carefullyraise the wiper link and
remove the wiper motor downwards.
-=-1
6 -96
2. Connectthe battery.
'I ""
3. Switch on the wiper motor and check the
wiper position.
5 -96 Tightening torques:
4. Disconnectthe electricalplugconnectionon Fasteningscrew, motor M6 8 Nm (6 ftlb.)
the wiper motor. Fastening nut, link M8 17 Nm 02.5 ftlb.)
Hexago[}headbolt M6 10 Nm (7.5 ftlb.)
92 15 19 Removing and installing the wiper motor 92 -5
Printed in Germany, 1997 996921
This is a source reference. Confirm exact model applicability in the original material.