fullymatted.
Back to search
Group 9 · Electrics / PAGE 99

92 60 19 Removing and installing tank for windscreen washer system · Removal Removal

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 99
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Windshield wiper and washer system 92 60 19 Removing and installing tank for windscreen washer system Removal Removal 7 I tank 3 I tank 1. Remove left front wheel and remove the wheel 1. The 3 I tank is not equippedwith a headlight housing liner. cleaning system. 2. Extract water from the tank and release and 2. The tank is fastened only by one M8 x 35 pull out the filler neck. hexagon-headbolt (tighteningtorque 20 Nm (15.0 ftlb.)), 3. Disconnectthe hose for the headlightcleaner nozzle at the headlightholder. 4. Carefullypull off the hose for the windscreen washer system. 5. Undofasteningscrewsand swingthe holder inward. 010_99 Installation 7 I tank or 3 I tank 1. First push 7 I tank under the wing at front, then engage electrical plug connection of the 009_99 pumps. 2. Push tank rearward into the holder and6. Pull tank forward out of the holder and swivel engage the electrical plug connectionfor it down at the rear. the fluid level indicator. 7. Disconnectelectrical plug connections of pumps and fluid level indicator and remove the tank in downwarddirection. 92 60 19 Removing and installing tank for windscreen washer system 92 -11 Printed in Germany -33, 1999 9969211

This is a source reference. Confirm exact model applicability in the original material.